BGForums
BGForums
The drain line is used to drain wastewater from the water softener system during the regeneration process. To connect the drain line, follow these steps:
The Harvey HV3 water softener installation manual is a comprehensive guide that provides step-by-step instructions for installing the system. Here's a summary of the installation process:
This usually indicates a piece of debris is stuck in the internal valve. Turn the unit to bypass and contact a technician. harvey hv3 water softener installation manual
Apply silicon lubricant to the O-rings on the flexible hoses.
Minimum 1.0 bar (14.5 psi) to maximum 6.0 bar (87 psi). A pressure-limiting valve is mandatory if your pressure exceeds 6 bar. Required Tools and Materials Pipe cutter or hacksaw The drain line is used to drain wastewater
: Avoid areas prone to freezing or excessive heat (e.g., directly next to a boiler). 2. Plumbing Connections
This article is compiled from publicly available information and user experiences. It is not the official Harvey HV3 Installation Manual from Harvey Water Softeners. For official documentation, warranty registration, and professional installation services, please contact Harvey Water Softeners directly. The manufacturer's official instructions, when available, should always take precedence over any guidance provided here. Turn the unit to bypass and contact a technician
Connect the brine tank to the water softener's brine valve. Make sure the brine tank is level and stable.
Identify the section of the main cold water pipe after the stopcock but before any branches to water heaters or kitchen cold taps.
Locate the main incoming water stopcock. The softener must be installed downstream of this valve.
