If your board is inside an SFF (Small Form Factor) case, you must use low-profile (LP) graphics cards that do not require external PCIe power cables, such as the Nvidia GTX 1650 LP or RTX 3050 6GB LP.
This is the most critical spec to understand. The , not the newer FM2+.
Here are the updated and detailed specifications for the . hp fxn1 e93839 motherboard specs updated
This board is designed for standard DDR3 modules but has limitations on total capacity. RAM Configuration 2x 240-pin DIMM Type: DDR3 Non-ECC, Unbuffered Speeds: 1066 MHz, 1333 MHz, 1600 MHz Max Capacity: 16GB total Storage Interfaces SATA: 4x SATA II (3.0 Gb/s) ports Note: This board usually lacks SATA III (6.0 Gb/s) 🔌 Expansion & I/O Ports
Supported speeds include 2133 MHz, 2400 MHz (supported on 7th gen processors), and 2666 MHz (runs at 2400 MHz). If your board is inside an SFF (Small
1 x PCI Slot (legacy support, present on select larger variations)
Integrated Intel HD Graphics (dependent on CPU) via DisplayPort, though PCIe x16 slot allows low-profile GPU upgrades. 5. Connectivity and Rear Ports Here are the updated and detailed specifications for the
If you have the Small Form Factor (SFF) version of this board, you are limited to "Low-Profile" graphics cards. The Microtower (MT) gives you much more clearance for full-sized GPUs.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.