Icom Ui7 Am Fm Unit Install

Installing an is a popular upgrade for classic Icom transceivers, specifically those designed with an option slot for this board, such as the Icom IC-735 Go to product viewer dialog for this item. Go to product viewer dialog for this item. Go to product viewer dialog for this item.

This guide is for informational purposes. The installation involves working inside a transceiver, which contains high voltages that can cause severe injury or death, even when unplugged. If you are not confident in your abilities, it is highly recommended to have the installation performed by a qualified electronics technician. Icom Inc. and the author of this guide assume no responsibility for any damage or injury resulting from following these instructions. Always disconnect the transceiver from its power source before beginning.

Remove the screws securing the and remove the cover. icom ui7 am fm unit install

The UI-7 unit connects to the radio via a plug-and-play pin header interface.

: A precision screwdriver (usually #1 or #2) matching your radio’s chassis screws. Installing an is a popular upgrade for classic

Installing the Icom UI-7 is a rewarding project that breathes new life into classic HF rigs like the IC-725 and IC-728. By carefully following these step-by-step instructions, you can successfully add AM and FM transmit and receive capabilities to your transceiver, expanding its utility for everything from working AM mode on 29 MHz FM to having simple, local-communication options on the 10m and 6m bands. While this project is well within the reach of a careful hobbyist, always prioritize safety and, when in doubt, consult a professional. Take your time, secure your connections, and enjoy the new versatility of your upgraded Icom radio.

Remove the screws securing the bottom case cover and lift it off to expose the main boards. 2. Positioning the UI-7 Board This guide is for informational purposes

Do not connect the UI7 audio outputs to the “AUX IN” of a car stereo head unit that shares a ground with the VHF radio. This can create a ground loop (alternator whine). Use a ground loop isolator if necessary.

Place the radio on a flat surface with the bottom facing up.

and have noticed the "AM/FM" button on the front panel does absolutely nothing, you aren't alone. These classic HF transceivers were designed with the UI-7 AM/FM Unit