Wait for the progress bar to finish and turn Green ("OK") or Red ("Fail"). Troubleshooting and Risks
MPALL requires two primary software binaries to rebuild your drive:
Do not unplug the USB drive, shut down your PC, or allow the PC to enter sleep mode during this process. The progress bar will cycle through formatting, erasing, and writing phases. Understanding the Results:
file that match your specific controller and flash memory type (MLC, TLC, or eD3). Repair Process Launch the Utility MPALL_F1_9000_v370_0E.exe as an administrator. : Connect your USB drive and click
Once you confirm your device features a supported Phison controller, prepare the software configuration. Low-Level Formatting (Without Firmware Files)
Locate and launch (the configuration builder). Select Advance Setting and click New Setting . In the Controller tab: Select your exact controller model (e.g., PS2251-67).
The official, unpatched versions of Phison MPALL are strictly locked down for corporate factory environments. They feature rigid verification checks that will reject a retail USB drive if its current parameters do not perfectly match the original factory profile.
The software is designed to work effectively with "Test Mode" (shorting pins on the flash chip), which is a critical feature for recovering "bricked" drives that are no longer detected by Windows. Recommended Use Case Description Primary Controller Support Optimized for PS2251-03 (USB 3.0) and PS2251-67/68 . Low-Level Format
Step 1: Identify Your Phison Controller (The Most Critical Step)
Save the configuration file as MP.ini in the same directory as the MPALL executable. Step 4: Run the Mass Production Tool
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.