Phison Mpall V5.13.0c ((new)) | Secure & Confirmed

: Initializes the controller communication.

Under the dropdown, select your exact Phison controller model (e.g., PS2251-07 ).

: An error occurred. Note the error code (e.g., CT-0x1042, CT-0x1049). This usually indicates either the wrong burner/firmware combination or a hardware-level failure in the NAND memory. Troubleshooting Common MPALL Errors Error: "Drive Not Detected"

In the tab, select your specific NAND flash memory. Phison Mpall V5.13.0c

Run the diagnostic tool and look for the (must be Phison) and the Controller Part-Number (e.g., PS2251-07). Note down the Flash ID code and Firmware Version displayed. Step 2: Download the Matching Firmware Files MPALL requires two distinct binary files to flash a drive:

: Fixes common issues where a drive shows "No Media," "Device not recognized," or becomes read-only.

Error: "CT-Read/Write Error" or "Bad Blocks Over High Limit" : Initializes the controller communication

Interface and modes

: Often, the process requires clicking "Update," checking "No Mapping," and running it once to clear the old settings before a full flash can succeed. Critical Warnings High Risk of Bricking

Typical prerequisites

(Optional) Customize your USB device strings, such as Vendor Name, Product Name, or LED indicators under the settings.

Key files you’ll encounter