Two Trees Sapphire Pro Firmware Upd

Before downloading any files, you must know what’s under the hood. Two Trees has shipped the Sapphire Pro with different board versions, most commonly: MKS Robin Nano v1.3

$30=1000 (max S-value for PWM) $31=0 (min power) $32=1 (laser mode enable)

If using the stock touchscreen, ensure you also copy the assets folder provided in the Two Trees configuration example so the icons load correctly. 5. Flashing the Printer Turn off your Sapphire Pro completely. Insert the MicroSD card into the motherboard slot. Turn on the printer. two trees sapphire pro firmware upd

Marlin 2.x is the industry standard for traditional 3D printing. It runs entirely on the printer's motherboard and utilizes the stock touchscreen. Prerequisites & Tools

has a vibrant community. By using popular open-source firmware like Marlin, users gain access to a wealth of community-developed configurations tailored specifically for the Sapphire Pro ’s hardware. The Upgrade Process Before downloading any files, you must know what’s

Official: Check the Two Trees official site for the latest stock updates.

– http://wiki.twotrees3d.com Contains direct download links for the latest upd packages. Flashing the Printer Turn off your Sapphire Pro completely

Before updating the firmware on your Two Trees Sapphire Pro, make sure to:

Insert the MicroSD card into the slot on the printer (not the side of the screen, but the motherboard slot). Turn the printer on.

mks_config.txt : (If using stock-based firmware) This configuration file dictates motor directions and bed sizes. Compiling firmware for Twotrees Sapphire Pro with MKS board